Forming of carbide cutting inserts
Metal cutting is inseparable from blades. The production process of cemented carbide blades includes pressing, sintering and shaping, fine grinding, coating and other processes. Come and see with me!
The blade pressing molding process is to install the upper and lower punches of the die and the die on the press. During the pressing process, the tungsten carbide alloy powder is pushed into the die of the die, and the powder is pressed into the shape of a blade under the heavy pressure of the press. In this process, the production of different cemented carbide inserts needs to replace the corresponding die, and the punch needs to be replaced after the punch wears out.
In the pressing and forming process of cemented carbide blades, to replace the die or punch on the press, an experienced operator is required to carry out the adjustment, because the precision control requirements are high, and collision may occur if the adjustment accuracy is not high , During the process of assembly and adjustment, pay attention to adjusting the installation position of the mold, and the press is in a state that cannot be produced.
For the die shop to process the punch, or to remove the punch from the press and send it to the die shop for trimming, it also needs to be clamped and calibrated on the machine tool.
Therefore, cemented carbide blades have high requirements for machinery, equipment and operators. Zhuzhou Jinxin has advanced imported equipment and experienced operators. Newcomers adopt the old and new, and can only be employed after passing the examination. Therefore, the quality of the cemented carbide blades produced is Assure.
Any interested items please feel free to contact:
Beryl
Mob: +8619973322258
wechat:19973322258
WhatsApp:+8619973322258
Email: 18073319588@ojinxin.com